Step 1.

Separate the pieces in to the two separate parts for the dice tower.

The Base and the Tower.

Step 2.

Assemble the Base.

  1. Starting with the large back wall and the two side pieces, pust them on to the base.

  2. Remove the backing from the felt insert and starting from the back of the tower stick it to the base. (We find it useful to use the base of the tower to smooth out the felt layer if you are having problems)

  3. Apply the short front piece to complete the base.

Step 3.

Assemble the Tower.

  1. Laying one side section with the etching face down, add the interior shelves.

  2. Add the front and back sections, taking care not to dislodge the shelves.

  3. Slowly press on the remaining side wall, starting at one end, easing all of the pins in to place.

  4. Add the floor piece.